5.1 When Paper Jams 83
2. Close the bypass tray once.
3. Remove the tray from the printer.
4. Carefully pull out any jammed paper
remaining inside the printer.
5. Push up the button and open the front
cover. Confirm that there are no scraps of
paper remaining inside the printer.
6. Carefully remove any jammed paper in the
printer. Confirm that there are no scraps of
paper left inside.
7. Close the front cover.
8. Insert the tray into the printer and push until
it stops.
Important
• Do not use excessive force on the tray. Doing so could damage the tray or the inside the printer.
To Next Page
Loading...
