106 5 Control Panel Settings
The following table describes the overview of the common menus.
Refer to
• For information on the basic procedure to set each menu item, refer to “Basic Procedure” (P. 107).
Note
• XPS stands for XML Paper Specification.
Common menu Description Reference
LanguageEmulation [ESCP]
Sets the ESC/P emulation mode.
‘ESC/P Emulation Setting Guide’
on the Driver CD Kit CD-ROM.
[HPGL]
Sets the HP-GL and HP-GL/2 emulation modes.
‘HP-GL, HP-GL/2 Emulation
Setting Guide’ on the Driver CD
Kit CD-ROM.
[PDF]
Configures the settings for printing PDF files directly.
“[PDF]” (P. 110)
[PCL]
Sets the PCL emulation mode.
‘PCL Emulation Setting Guide’ on
the Driver CD Kit CD-ROM.
[PostScript]
Sets the PostScript-related settings.
“[PostScript]” (P. 112)
[XPS]
Configures the settings for printing XPS files directly.
“[XPS]” (P. 113)
Print Reports Allows you to print a variety of reports/lists. “Printing Reports/Lists” (P. 219)
Meter Reading Displays the number of printed pages on the control
panel.
“Checking the Meter Reading by
Output Color (Meter)” (P. 223)
Admin Menu [Network/Port]
Sets host interfaces and the settings required to enable
their communication.
“[Network/Port]” (P. 114)
[System Settings]
Sets the printer's basic functions, such as alert tones and
the Energy Saver feature. It also sets a password for the
control panel to prevent settings from being changed
unintentionally.
“[System Settings]” (P. 138)
[Printer Settings]
Sets the paper trays and the Auto Tray Selection feature.
“[Printer Settings]” (P. 154)
[Allocate Memory]
Changes the size of memory and form memory of each
interface.
“[Allocate Memory]” (P. 165)
[Image Quality]
Adjusts color density when the color density of the print
quality has shifted.
“[Image Quality]” (P. 167)
[Init/Delete Data]
Initializes the hard disk and settings, and deletes data
(such as forms) stored in the printer.
“[Init/Delete Data]” (P. 169)
Language Switches the control panel display language. “[Language]” (P. 171)
To Next Page
Loading...
Need help?
General