Xerox DocuPrint CM205 b - Page 158

157 Using the Operator Panel Menus and Keypad
• Adjust Fuser
Purpose:
To specify the optimum temperature settings for printing for the fusing unit. To lower the temperature,
set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. When the printed paper has
curled, try to lower the temperature. When the toner does not fuse on the paper properly, try to
increase the temperature.
NOTE:
• The print quality changes depending on the values you select for this item.
Values:
Bond 0*
-3 – +3
Light Card 0*
-3 – +3
LW Gloss Card 0*
-3 – +3
Labels 0*
-3 – +3
Recycled 0*
-3 – +3
Envelope 0*
-3 – +3
Plain 0*
-3 – +3
Bond 0*
-3 – +3
Light Card 0*
-3 – +3
LW Gloss Card 0*
-3 – +3
Labels 0*
-3 – +3
Recycled 0*
-3 – +3
Envelope 0*
-3 – +3