1.3 <
Introduction>
Rear view
1
rear cover
5
parallel port
2
duplex unit
6
power receptacle
3
network port
7
power switch
4
USB port
* The figure above shows an Phaser 3600/DN
with all available options.
Control panel overview
1
Start/Stop: Cancel an operation at any time; resume printing.
2
Back: Sends you back to the upper menu level.
3
Status: Shows the status of your printer. See page 9.7.
4
Menu: Enters Menu mode and arrows through the available
menus.
5
LCD: Displays the printer status, error messages and menus
in progress.
6
Up Arrow button: The option available in the selected menu
increase values.
7
OK: Confirms the selection on the display.
8
Down Arrow button: The option available in the selected
menu decrease values.
/
To Next Page
Loading...
