8.4 <
Maintenance>
3 Thoroughly roll the cartridge 5 or 6 times to distribute the toner
evenly inside the cartridge.
Note
If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
4 Hold the print cartridge by the handle and slowly insert the
cartridge into the opening in the printer.
5 Tabs on the sides of the cartridge and corresponding grooves
within the printer will guide the cartridge into the correct position
until it locks into place completely.
6 Close the top cover. Make sure that the cover is securely closed.
Replacing the print cartridge
When the print cartridge is completely empty:
• Toner Low Replace Toner appears on the display.
•The Status LED lights red.
At this stage, the print cartridge needs to be replaced. For order
information for print cartridges, see page 7.1.
1 Open the top cover.
2 Pull the print cartridge out.
3 Remove the new print cartridge from its bag.
Caution
Do not use sharp objects, such as a knife or scissors, to open
the print cartridge package. They might scratch the drum of
the cartridge.
4 Roll the cartridge 5 or 6 times to distribute the toner.
Thoroughly roll the cartridge to assure maximum copies per
cartridge. Save the box and the plastic bag for shipping.
To Next Page
Loading...
