Xerox VersaLink C415

1. Load your original documents.
• For single pages or paper that cannot be fed using the duplex automatic document feeder, use the
document glass. Lift the duplex automatic document feeder, then place the original document face down in
the upper-left corner of the document glass.
• For multiple, single, or 2-sided pages, use the duplex automatic document feeder. Remove any staples and
paper clips from the pages. Insert the original documents face up in the duplex automatic document feeder
with the top of the page entering the feeder first. Adjust the paper guides so that they fit against the
original documents.
Note: When the original documents are detected, the automatic document feeder confirmation indicator
LED illuminates.
2. At the printer control panel, press the HHoommee button.
3. Touch WWoorrkkffllooww SSccaannnniinngg.
4. To clear previous app settings, touch RReesseett.
5. To select a workflow, from the Pick a Workflow screen, touch an option. If necessary, to refresh the workflow list,
touch UUppddaattee.
Note: If the Pick a Workflow screen does not appear automatically, to display the screen, touch CChhaannggee
WWoorrkkffllooww.
6. If needed, enter recipients, workflow destination details, or browse to the location required for the scanned
documents.
Xerox
®
VersaLink
®
C415 Color Multifunction Printer User Guide 125
Xerox
®
Apps