Installing the PPD File on the Workstation
1. On the Xerox Support website, from the Drivers and Downloads page, download the Xerox
®
PPD for CUPS
(Common UNIX Printing System).
2. Copy the PPD file into the CUPS ppd/Xerox folder on your workstation. If you are unsure of the location of the
folder, use the FFiinndd command to locate the PPD files.
3. Follow the instructions that are included with the PPD file.
Adding the Printer
1. Verify that the CUPS (Common UNIX Printing System) daemon is running.
2. Open a Web browser, type http://localhost:631/admin, then press EEnntteerr or RReettuurrnn.
3. For User ID, type root. For password, type the root password.
4. Click AAdddd PPrriinntteerr, then follow the onscreen prompts to add the printer to the CUPS printer list.
Printing with CUPS (Common UNIX Printing System)
CUPS supports the use of both the System V (lp) and Berkeley (lpr) printing commands.
1. To print to a specific printer in System V, type lp -dprinter filename, then press EEnntteerr.
2. To print to a specific printer in Berkeley, type lpr -Pprinter filename, then press EEnntteerr.
AS/400
Xerox provides Work Station Customization Object (WSCO) files to support IBM i V6R1 or later. A Work Station
Customization Object is a lookup table that the host print transform (HPT) uses to translate AS/400 commands to
the equivalent PCL code that is specific to a particular printer. A WSCO file can modify many print features,
including: paper input tray, 2-sided printing, characters per inch, lines per inch, orientation, fonts, and margins.
The XTOOLS library provides a source WSCO file for each supported Xerox
®
printer or device. The library and
installation instructions are available from www.support.xerox.com.
To install the XTOOLS library, select the downloadable files for the IBM AS/400 operating system, unzip the
downloaded XTOOLSxxxx.zip file, then follow the instructions to install the library. Download and install the
library only once.
Note:
• The host print transform works only on AFPDS and SCS files. To use the WSCO for printing, convert IPDS-
formatted printer files to AFPDS files.
• Administrator credentials with IOSYSCFG permissions are required to create a device description or a
remote queue.
• For details on AS/400, refer to the IBM AS/400 Printing V, (Red Book), available on the IBM website.
Installing the WSCO Library and Setting Up Print Queues
For detailed instructions on installing the WSCO library and setting up print queues, refer to the installation
instructions that are included with the library.
166
Xerox
®
VersaLink
®
C415 Color Multifunction Printer User Guide
Printing
To Next Page
Loading...
Need help?
General
Weight and Dimensions
