Xerox VersaLink C415

• Manual Feeder
• Tray 1
• Bypass Tray
Guidelines for Printing Envelopes
• Use only paper envelopes.
• Do not use envelopes with windows or metal clasps.
• Print quality depends on the quality and construction of the envelopes. If you do not get the desired results, try
another envelope brand.
• Maintain constant temperatures and relative humidity.
• Store unused envelopes in their packaging to avoid excess moisture and dryness which can affect print quality
and cause wrinkling. Excessive moisture can cause the envelopes to seal before or during printing.
• Remove air bubbles from the envelopes before loading them into the tray by setting a heavy book on top of the
envelopes.
• In the print driver software, select Envelope as the paper type.
• Do not use padded envelopes. Use envelopes that lie flat on a surface.
• Do not use envelopes with heat-activated glue.
• Do not use envelopes with press-and-seal flaps.
Loading Envelopes
For supported envelope sizes, refer to Supported Paper.
To load envelopes in Manual Feeder, Tray 1, and Bypass Tray, do the following:
1. Pull out the tray until it stops.
2. Remove any paper that is a different size or type.
Xerox
®
VersaLink
®
C415 Color Multifunction Printer User Guide 213
Paper and Media