Xerox VersaLink C415

6. To fit the paper, adjust the length and width paper guides. Pinch the guide locks, then slide the paper guides in
until they touch the paper.
7. Slide the tray back into the printer.
8. At the control panel, select the correct paper size, type, and color.
9. To confirm the settings, touch CCoonnffiirrmm.
Note: To change the paper settings when the tray is set to Dedicated mode, refer to Configuring Dedicated
Paper Trays.
LOADING PAPER IN THE BYPASS TRAY
The Bypass Tray supports the widest variety of media types. The tray is intended primarily for small-quantity jobs
that use special media. The Bypass Tray can load up to 100 sheets of paper.
To load paper in the Bypass Tray, do the following:
Xerox
®
VersaLink
®
C415 Color Multifunction Printer User Guide 205
Paper and Media