instructions about printing a configuration report, refer to Printing a Configuration Report.
Follow the instructions provided with the software to download the files and upgrade your device. You can configure
the device to connect routinely to an FTP directory on your network to update device software automatically. You
can also update the device software manually. For more information about updating system operating software,
refer to the System Administrator Guide at www.xerox.com/office/VLC415docs.
REMOVING THE INTERNAL PACKING MATERIALS
The printer comes with internal packing materials. Remove the packing materials and install the imaging unit and
the toner cartridge, correctly.
1. At the front of the printer, open Door A.
2. From behind the front door, remove the red packing materials, such as plastic loops and clips.
3. Close Door A.
4. At the right-side of the printer, open Door B.
5. Pull and remove the red plastic strip.
54 Xerox
®
VersaLink
®
C415 Color Multifunction Printer User Guide
Getting Started
To Next Page
Loading...
