Using Your Printer in Linux
29
5
When the installation is complete, click
Finish
.
The installation program has added the Unified Driver Configurator
desktop icon and Xerox Unified Driver group to the system menu
for your convenience. If you have any difficulties, consult the
onscreen help that is available through your system menu or can
otherwise be called from the driver package windows applications,
such as
Unified Driver Configurator
or
Image Manager
.
N
OTE
: Installing the driver in the text mode:
• If you do not use the graphical interface or have failed the driver
installation, you have to use the driver in the text mode.
• Follow the step 1 to 3, then type [root@localhost Linux]# ./install.sh,
than follow the instruction on the terminal screen. Then the
installation completes.
• When you wan to uninstall the driver, follow the installation instruction
above, but type [root@localhost Linux]# ./uninstall.sh on the terminal
screen.
Uninstalling the Unified Linux Driver
1
When the Administrator Login window appears, type in
root
in the
Login field and enter the system password.
N
OTE
: You must log in as a super user (root) to install the printer
software. If you are not a super user, ask your system administrator.
2
Insert the printer software CD-ROM. The CD-ROM will
automatically run.
If the CD-ROM does not automatically run, click the icon at the
bottom of the desktop. When the Terminal screen appears, type in:
If the CD-ROM is secondary master and the location to mount is /
mnt/cdrom,
[root@localhost root]#mount -t iso9660 /dev/hdc /mnt/cdrom
[root@localhost root]#cd /mnt/cdrom/Linux
[root@localhost root]#./uninstall.sh
N
OTE
: The installation program runs automatically if you have an
autorun software package installed and configured.
3
Click
Uninstall
.
4
Click
Next
.
5
Click
Finish
.
To Next Page
Loading...
Need help?
General
