Using Your Printer with a Macintosh
38
For a USB-connected
1
Follow the instructions on “Installing Software” on page 36 to install
the PPD and Filter files on your computer.
2
Open the
Applications
folder
→
Utilities
, and
Print Setup Utility
.
• For MAC OS 10.5, open
System Preferences
from the
Applications
folder, and click
Print & Fax
.
3
Click
Add
on the Printer List.
• For MAC OS 10.5, press the “
+
” icon then a display window will
pop up.
4
For MAC OS 10.3, select the
USB
tab.
• For MAC OS 10.4, click
Default Browser
and find the USB
connection.
• For MAC OS 10.5, click
Default
and find the USB connection.
5
Select
your printer name
.
6
For MAC OS 10.3, if Auto Select does not work properly, select
Xerox
in
Printer Model
and
your printer name
in
Model Name
.
• For MAC OS 10.4, if Auto Select does not work properly, select
Xerox
in
Print Using
and
your printer name
in
Model
.
• For MAC OS 10.5, if Auto Select does not work properly, select
Select a driver to use...
and
your printer name
in
Print Using
.
Your machine appears on the Printer List and is set as the default
printer.
7
Click
Add
.
Installable Options
After setting up for your printer, you can set some more detailed options.
1
Open the
Applications
folder
→
Utilities
, and
Print Setup Utility
.
• For MAC OS 10.5, open
System Preferences
from the
Applications
folder, and click
Print & Fax
.
2
Select
your printer model name
.
3
Click
Show Info
.
• For MAC OS 10.5, click
Options & Supplies...
4
Select
Installable Options
tab.
• For MAC OS 10.5, Select
Driver
tab.
5
Configure each items in
Installable Options
window.
•
Tray n
: If the machine have optional tray n, you have to check the
tray name.
•
Duplex Unit
: If the machine has duplex unit, you have t o check
this item.
•
Printer Memory
: If you installed additional printer memory, you
have to configure the size of memory.
6
Select
Apply Change
.
To Next Page
Loading...
Need help?
General
