Xerox WORKCENTRE 3210 User Manual

42 _Copying
PRINTING ON BOTH SIDES OF PAPER
You can set the machine to print documents on both sides of paper.
(WorkCentre 3220 only)
1. Press Copy .
2. Press Menu until Copy Setup appears on the bottom line of the
display and press OK.
3. Press the left/right arrow until Duplex Print appears and press OK.
4. Press the left/right arrow until the binding option you want appears.
•Off:Copys in Normal mode.
• Short Edge: Copys pages to be read by flipping like a note pad.
• Long Edge: Copys pages to be read like a book.
5. Press OK to save your selection.
SETTING COPY TIMEOUT
You can set the time the machine waits before it restores the default copy
settings, if you do not start copying after changing them on the control
panel.
1. Press Menu until System Setup appears on the bottom line of the
display and press OK.
2. Press OK when Machine Setup appears.
3. Press the left/right arrow until Timeout appears and press OK.
4. Press the left/right arrow until the time setting you want appears.
Selecting Off means that the machine does not restore the default
settings until you press Start to begin copying, or Stop/Clear to
cancel.
5. Press OK to save your selection.
6. Press Stop/Clear to return to ready mode.

Xerox WORKCENTRE 3210 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 24 ppm
Duplex Printing	Manual
Monthly Duty Cycle	Up to 30, 000 pages
Processor Speed	360 MHz
Memory	128 MB
Standard Paper Capacity	250 sheets
Scanner Type	Flatbed, ADF
Fax Transmission Speed	33.6 Kbps
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	A4, A5, B5, Executive, Folio, Legal, Letter
Scan Resolution	Up to 4800 x 4800 dpi
Maximum Paper Size	8.5 x 14 in (Legal)
Operating System Compatibility	Windows, Mac OS
Print Resolution	600 x 600 dpi