Using Your Printer in Linux
30
Using the Unified Driver Configurator
Unified Linux Driver Configurator is a tool primarily intended for
configuring Printer or MFP devices. Since an MFP device combines the
printer and scanner, the Unified Linux Driver Configurator provides
options logically grouped for printer and scanner functions. There is also
a special MFP port option responsible for the regulation of access to an
MFP printer and scanner via a single I/O channel.
After installing the Unified Linux driver, the Unified Linux Driver
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver Configurator
1
Double-click
Unified Driver Configurator
on the desktop.
You can also click the Startup Menu icon and select
Xerox Unified
Driver
and then
Unified Driver Configurator
.
2
Press each button on the Modules pane to switch to the
corresponding configuration window.
You can use the onscreen help by clicking
Help
.
3
After changing the configurations, click
Exit
to close the Unified
Driver Configurator.
Printers Configuration button
Scanners Configuration button
Ports Configuration button
Printers Configuration
Printers configuration has the two tabs:
Printers
and
Classes
.
Printers Tab
You can see the current system’s printer configuration by clicking on the
printer icon button on the left side of the Unified Driver Configurator
window.
You can use the following printer control buttons:
•
Refresh
: renews the available printers list.
•
Add Printer
: allows you to add a new printer.
•
Remove Printer
: removes the selected printer.
•
Set as Default
: sets the current printer as a default printer.
•
Stop
/
Start
: stops/starts the printer.
•
Test
: allows you to print a test page to check if the machine is
working properly.
•
Properties
: allows you to view and change the printer properties.
For details, see page 32.
Shows all of the
installed printer.
Switches to Printer
configuration.
Shows the status,
model name and URI of
your printer.
To Next Page
Loading...
Need help?
General
