Introduction_21
UNDERSTANDING THE STATUS LED
The color of the Status LED indicates the machine's current status.
STATUS DESCRIPTION
Off • The machine is powered off-line.
• The machine is in power save mode. When
data is received, or any button is pressed, it
switches to on-line automatically.
Green Blinking • When the green LED slowly blinks, the
machine is receiving data from the computer.
• When the green LED rapidly blinks, the
machine is printing data.
On • The machine is powered on and can be used.
Red Blinking • A minor error has occurred and the machine is
waiting for the error to be cleared. Check the
display message, and solve the problem
referring to "Understanding display
messages" on page 73.
• The print cartridge is low. Order a new print
cartridge, see "Ordering supplies and
accessories" on page 83. You can temporarily
improve print quality by redistributing the
toner. See "Replacing the print cartridge" on
page 65
On • A problem has occurred such as a paper jam,
cover opened or no paper in the tray, so that
the machine cannot continue the job. Check
the message on the display, and refer to
"Understanding display messages" on
page 73 to solve the problem.
• The print cartridge is empty, or needs to be
changed. See "Understanding display
messages" on page 73
Always check the message on the display to solve the problem. The
instruction in the Troubleshooting section will guide you to operate the
machine properly. See "Understanding display messages" on page 73
for more information.
To Next Page
Loading...
Need help?
General
