Xerox WORKCENTRE 3210 User Manual

Using Your Printer with a Macintosh
42
Scanning
You can scan documents using Image Capture program. Macintosh OS
offers Image Capture program.
Scanning with USB
1 Make sure that your machine and computer are turned on and
properly connected to each other.
2 Load the document(s) face up into the DADF (or ADF).
OR
Place a single document face down on the document glass.
3 Start Applications and click Image Capture .
N OTE : If No Image Capture device connected message appears,
disconnect the USB cable and reconnect it. If the problem persists,
please refer to the Image Capture ’s help.
4 Set the scan options on this program.
5 Scan and save your scanned image.
N OTE :
• For more information about using
Image Capture , please refer to the
Image Capture ’s help.
• Use TWAIN-compliant software to apply more scan options.
• You can also scan using TWAIN-compliant softwares, such as Adobe
Photoshop.(Only for Macintosh OS X 10.3.9 or above)
• Scan process differ according to TWAIN-compliant softwares. Please
refer to the user’s guide of the software.
• When scanning does not operate in
Image Capture , update Mac OS
to the latest version.
Image Capture operates property in Mac OS
10.3.9 or higher and Mac OS 10.4.7 or higher.

Xerox WORKCENTRE 3210 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 24 ppm
Duplex Printing	Manual
Monthly Duty Cycle	Up to 30, 000 pages
Processor Speed	360 MHz
Memory	128 MB
Standard Paper Capacity	250 sheets
Scanner Type	Flatbed, ADF
Fax Transmission Speed	33.6 Kbps
Connectivity	USB 2.0, Ethernet
Media Sizes Supported	A4, A5, B5, Executive, Folio, Legal, Letter
Scan Resolution	Up to 4800 x 4800 dpi
Maximum Paper Size	8.5 x 14 in (Legal)
Operating System Compatibility	Windows, Mac OS
Print Resolution	600 x 600 dpi