Xerox WorkCentre 4118 User Manual

Page 2-2 Xerox WorkCentre 4118 System Administration Guide
Basic Network Installation
Information Checklist
Before starting the basic network installation procedures, please ensure the following items
are available or have been performed:
If problems are encountered during the WorkCentre 4118 installation, refer to the Problem
Solving chapter for assistance.
CAUTION: Do not connect the network cable to the WorkCentre 4118 until instructed
to do so.
Item By
An existing operational network utilizing TCP/IP is required, these
procedures are not designed to install a network.
Customer
A suitable network cable. Customer
If you are going to configure TCP/IP manually, you need to obtain and
record the following information:
• TCP/IP Address:
• Gateway Address:
• Subnet Mask Address:
• Primary DNS Server Address:
Refer to the Glossary for additional information on the Gateway
Address, Subnet Mask Address and Primary DNS, if needed.
Customer
Test the WorkCentre 4118 to ensure it is installed fully and functioning
correctly.
Customer
WorkCentre 4118 print drivers. Xerox

Xerox WorkCentre 4118 Specifications

General

Print Technology	Laser
Print Speed	18 ppm
Max Print Resolution	600 x 600 dpi
Copy Speed	18 cpm
Max Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Paper Capacity	250 sheets
Functions	Print, Copy, Scan, Fax
Duplex Printing	Manual
Memory (Standard)	64 MB
Connectivity	USB 2.0
Supported Operating Systems	Windows, Mac