Xerox WorkCentre 4118

Page 10-2 Xerox WorkCentre 4118 System Administration Guide
Administration Tools
Network Tools
Three tools are provided for the network:
¾ Reset NIC - resets the network card after changes have been implemented.
¾ Factory Defaults- restores all settings to their factory state.
¾ Print System Data - provides you with a hard copy of the network settings.
Reset NIC
To reset the network card:
¾ Press the [Machine Status] button.
1
2
¾ Press or until System
Admin Tools displays and press
[Enter].
¾ If the System Admin Tools has
already been passcode
protected, type in the password
and press [Enter].
System Admin Tools
[Passcode Protect]
3
¾ Press or until Network
Setup displays and press [Enter].
System Admin Tools
[Network Setup]
4
¾ Press or until Reset NIC
displays and press [Enter].
¾ Choose Yes to reset the network
card.
Network Setup
[Reset NIC]