Xerox WorkCentre 4118 User Manual

Page 4-14 Xerox WorkCentre 4118 System Administration Guide
Print Driver Installation for Networked Printers
Test Print
To ensure the WorkCentre 4118 has been installed on the network correctly a test print should
be submitted from a client workstation. Perform the following steps:
¾ Open a document on a client workstation.
¾ Select the WorkCentre 4118 as the printer for sending documents to.
¾ Print the document on the device and verify that it prints correctly.
¾ Ensure the print driver is installed on every workstation that will be sending jobs to the
device.
¾ Repeat the test for all workstations that will be sending jobs to the device.
If the test print fails, refer to the Problem Solving chapter for trouble-shooting procedures.
1
2
3
4
5

Xerox WorkCentre 4118 Specifications

General

Print Technology	Laser
Print Speed	18 ppm
Max Print Resolution	600 x 600 dpi
Copy Speed	18 cpm
Max Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Paper Capacity	250 sheets
Functions	Print, Copy, Scan, Fax
Duplex Printing	Manual
Memory (Standard)	64 MB
Connectivity	USB 2.0
Supported Operating Systems	Windows, Mac