Xerox WorkCentre 4118

Page 2-8 Xerox WorkCentre 4118 System Administration Guide
Basic Network Installation
After a short period of time, the network will allocate the required addresses.
Print a System Data sheet to check the addresses (see the User Guide for printing reports).
5
¾ Press or until Configure
Network displays and press
[Enter].
Network Setup
[Config. Network]
6
¾ Press or until TCP/IP
displays and press [Enter].
You can use DHCP or BOOTP to
automatically configure TCP/IP
on the machine.
Config Network
[TCP/IP]
7
¾ Press or until the
required setting method displays
and press [Enter].
TCP/IP
[DHCP]
8