Xerox WorkCentre 4118 System Administration Guide Page 7-21
Network Installation Using Internet Services
Test Print
To ensure Internet Services has been setup correctly a test print should be submitted from a
client workstation. Perform the following steps:
¾ Create a print-ready PostScript, PCL, or ASCII text file and save it on a client workstation.
¾ From a workstation that is connected to the Internet or an Intranet, use a Browser to
access the WorkCentre 4118 embedded HTTP Server Home Page.
¾ In the URL field, enter the IP Address of the WorkCentre 4118.
Example: If the IP Address is 192.168.100.100, enter the following in the URL field:
http://192.168.100.100
¾ Verify that files can be sent from the workstation to the WorkCentre 4118 and that they
print.
At the CentreWare Internet Services homepage for the WorkCentre 4118 select
the [Print] tab.
From the Print-Ready File section choose the [browse] button and browse to
your print ready file.
Click the [print] button.
¾ The Internet Services installation process is now complete.
If the test print fails, refer to the Problem Solving chapter for trouble-shooting procedures.
1
2
3
4
5
To Next Page
Loading...
Need help?
General
