Product overview
WorkCentre 5019/5021
User Guide
3-12
Note Some buttons are not available on some models. If you add certain options, you will be able
to use them. For more information, contact our Customer Support Center.
20 Lighten/Darken button Press this button to select a copy density level or toner saver mode.
The selection moves to the right on the machine status diagram every time
the button is pressed.
When the button is pressed while the rightmost icon (toner saver mode) is
lit, the selection moves back to the leftmost icon.
For more information, refer to Lighten/Darken on page 5-15.
21 Original Type button Press this button to select a document type of the document.
The selection moves to the right every time the button is pressed.
For more information, refer to Original type on page 5-14.
22 Collated button Press this button to set collate when copying multiple copies.
The selection switches between sorting and stacking every time the button
is pressed.
When documents are set in the document feeder, this feature is
automatically enabled.
For more information, refer to Collate on page 5-11.
23 Pages per Side button Press this button to use the Pages per Side feature.
Normally, the light is off (Off). The selection moves to the right from Off
(disabled) → 2-up → 4-up every time the button is pressed. When the
button is pressed while 4-up is lit, the light goes off again.
When 2-up or 4-up is selected, the scanning size and orientation that
matches the paper size are displayed on the original size display area of the
machine status diagram.
For more information, refer to Pages per side on page 5-19.
No. Component Description
To Next Page
Loading...
Need help?
General
