Xerox WorkCentre 5325 User Manual

Scanning
WorkCentre 5300 Series Multifunction Printer
User Guide
125
Scanning to a Home Directory
The Scan to Home feature allows you to scan a document to your home directory. The network
location of your home directory is defined by the system administrator.
Note: This feature must be configured by the system administrator.
To use the Scan to Home feature:
1. Load the original on the document glass or in the document feeder.
2. On the control panel, press the Services Home button.
3. Touch Network Scanning.
4. Touch the template created by your system administrator.
5. The template defines the scan settings as well as the destination of the image. To change any of
the scan settings, touch the four menus at the bottom of the touch screen: Color Scanning,
2-Sided Scanning, Original Type and Scan Presets. For details, see Setting Scan Options on
page 127.
6. Press the green Start button.
For details, see the System Administrator Guide at www.xerox.com/office/WC53XXdocs.

Xerox WorkCentre 5325 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Standard Paper Capacity	1, 090 sheets
Max Paper Capacity	5, 090 sheets
Processor	533 MHz
Copy Speed	Up to 25 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Automatic
Paper Sizes	A4, A5
Memory	256 MB
Hard Drive	80 GB
Connectivity	USB 2.0, Ethernet
Scan Destinations	Email, Network, USB
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, macOS, Linux