Xerox WorkCentre 5325 User Manual

Faxing
WorkCentre 5300 Series Multifunction Printer
User Guide
141
Server Fax
When using the Server Fax, a document is scanned and sent to a fax server on the network. The fax
server then sends the fax over a telephone line to a fax machine.
Notes:
• The Server Fax service must be enabled before use, and a fax server must be configured.
• Server Fax cannot be used together with the Fax feature. When Server Fax is in use, the
touch screen Fax button activates Server Fax.
• Server Fax cannot be used together with the Internet Fax feature. When Server Fax is in
use, the touch screen Internet Fax button does not appear.
Sending a Server Fax
1. Load the original on the document glass or in the document feeder.
2. On the control panel, touch Services Home.
3. Touch Fax.
4. Enter the number using the alphanumeric keypad, then touch Add.
5. Touch New Recipients, enter the number using the touch screen keyboard, touch Add, then
touch Close.
6. To use a number previously stored in the Address Book:
a. Touch Address Book.
b. Touch the arrows to scroll through the list.
c. Touch the desired address.
d. Touch Add, then touch Close.
7. Adjust fax options if necessary. For details, see Selecting Fax Options on page 145.
8. Press the green Start button. The printer scans the pages and transmits the fax document when
all pages have been scanned.

Xerox WorkCentre 5325 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Standard Paper Capacity	1, 090 sheets
Max Paper Capacity	5, 090 sheets
Processor	533 MHz
Copy Speed	Up to 25 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Automatic
Paper Sizes	A4, A5
Memory	256 MB
Hard Drive	80 GB
Connectivity	USB 2.0, Ethernet
Scan Destinations	Email, Network, USB
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, macOS, Linux