Faxing
WorkCentre 5300 Series Multifunction Printer
User Guide
149
Adding Address Book Entries
This section includes:
• Adding an Individual Address on page 149
• Deleting an Individual Address on page 149
• Adding a Group on page 149
• Deleting a Group on page 150
• Using Chain Dial on page 150
The Address Book can store email, server, fax, and Internet fax addresses. Addresses can be stored for
individuals, or groups containing multiple individuals.
Note: Address Book entries can also be managed in CentreWare Internet Services. For details, see
the System Administrator Guide at www.xerox.com/office/WC53XXdocs.
Adding an Individual Address
1. On the control panel, press the Machine Status button.
2. On the touch screen, touch the Tools tab.
3. Touch Setup & Calibration, touch Setup, then touch Add Address Book Entry.
4. On the next screen, touch an <Available> address in the scrolling list.
5. Touch Address Type, touch the desired address type, then touch Save.
Each Address Book type requires different settings.
6. Touch each desired item in the list, enter the information using the alphanumeric keypad or touch
screen keyboard, then touch Save.
7. When all desired settings have been configured, touch Save to complete the Address Book entry.
Deleting an Individual Address
1. On the control panel, press the Machine Status button.
2. On the touch screen, touch the Tools tab.
3. Touch Setup & Calibration, touch Setup, then touch Add Address Book Entry.
4. On the next screen, touch the desired address in the scrolling list.
5. Touch Delete Entry, then touch Delete to confirm.
Adding a Group
Create a group to send a fax to multiple individuals. Groups can include both previously stored
individuals and group entries.
Note: Individual entries must be configured before groups can be defined.
1. On the control panel, press the Machine Status button.
2. On the touch screen, touch the Tools tab.
3. Touch Setup & Calibration, touch Setup, then touch Create Fax Group Recipients.
To Next Page
Loading...
Need help?
General
