Xerox WorkCentre 5325 User Manual

Printing
WorkCentre 5300 Series Multifunction Printer
User Guide
55
Loading Media
This section includes:
• Loading Paper in Trays 1 and 2 on page 55
• Loading Paper in Trays 3 and 4 on page 57
• Configuring Tray 6 on page 58
• Loading Paper in Tray 6 on page 60
• Loading Paper in Tray 5 (Bypass Tray) on page 60
• Loading Envelopes in Tray 5 (Bypass Tray) on page 62
• Loading Envelopes in the Envelope Tray on page 62
• Printing on Special Media on page 64
Select the appropriate tray depending on the media you plan to use. For details, see Supported Media
on page 51.
Note: In addition to the standard media types, the printer allows up to five custom media
type selections.
For faster printing speeds, load paper 305 mm (12 in.) or shorter for long-edge (LEF). Load paper longer
than 305 mm (12 in.) for short-edge feed (SEF).
Loading Paper in Trays 1 and 2
Tray 1 and Tray 2 accept a maximum of approximately 520 sheets of 80 g/m² paper.
• Tray 1 accepts paper weights from 60 g/m² through 105 g/m².
• Tray 2 accepts paper weights from 60 g/m² through 215 g/m².

Xerox WorkCentre 5325 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Standard Paper Capacity	1, 090 sheets
Max Paper Capacity	5, 090 sheets
Processor	533 MHz
Copy Speed	Up to 25 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Duplex Printing	Automatic
Paper Sizes	A4, A5
Memory	256 MB
Hard Drive	80 GB
Connectivity	USB 2.0, Ethernet
Scan Destinations	Email, Network, USB
Fax Transmission Speed	33.6 Kbps
Operating System Compatibility	Windows, macOS, Linux