Page 9-16 Xerox WorkCentre M15/M15i User Guide
Machine Administration
Memory Clear
The following information stored in the machine’s memory can be cleared:
SYSTEM ID The fax number and name are cleared from the machine’s memory.
SYSTEM DATA Restores all the user-selectable options to the factory default.
PHONEBK/
MEMORY
Clears the Speed Dial or Group Dial numbers stored in the memory. In addition, all the
Scheduled Job Operations reserved are also canceled.
TX-RX
JOURNAL
Clears all records of transmissions and receptions.
Clearing the Memory
Use the following instructions to clear the required information from the machine’s memory:
Ø Press [Menu/Exit] on the control panel. The display shows the first menu; SYSTEM DATA.
Ø Press or until ‘MEMORY CLEAR’ appears, then press [Enter].
The display shows the items available for clearing.
Ø Press or until the item requiring clearing displays then press [Enter] to clear the
item.
To exit without clearing the item, press the [Menu/Exit] key.
Ø Repeat the procedure to clear another item or press [Menu/Exit] or [Stop] to exit and return
to Standby mode.
To Next Page
Loading...
