Xerox WorkCentre M15 - Scanning Procedure

Xerox WorkCentre M15/M15i User Guide Page 8-3
Scan (M15i Only)
Scanning Procedure
These instructions explain advanced scanning with a TWAIN compliant application
program.
l Refer to the
documentation
provided by the
application
manufacturer to
learn how to scan
and access an
image.
Load the Originals
Automatic Document Feeder (ADF):
i Up to 30 sheets of 80 g/m
2
(20lb bond) paper can be loaded. Weight ranges from 45 - 105 g/m
2
(12.5 - 28lb). Sizes range from B5 to Legal (7” x 10” to 8.5” x 14” ). Refer to “Scanner and Copier
Specifications” on page 12-5 for full ADF specifications.
1
Ø Remove all staples and paper
clips prior to loading.
Ø Adjust the sliding document
guides to the size required.
Ø Insert the originals neatly into the
Automatic Document Feeder,
face up.
The first page should be on top
with the headings towards the
back or left of the machine.
Ø Align the stack with the left and
rear edges of the tray. Adjust the
guides to just touch the edges of
the originals.