Xerox WorkCentre M15 - Resetting the Machine

Xerox WorkCentre M15/M15i User Guide Page 11-21
Troubleshooting
Resetting the Machine
If problems are experienced with the machine or the machine locks up a reset may be
required. Use the following instructions to reset and reboot the machine:
l This
programming
sequence must
be performed
within 1.5
seconds.
Ø
Press the [Clear/Clear All] key.
Ø Press the navigation key.
Ø Press the [Clear/Clear All] key again.
Ø Press the navigation key.