Page 2-4 Xerox WorkCentre M15/M15i User Guide
Getting Started
Making Connections
Use the following instructions to make the necessary connections required to install the
WorkCentre M15/M15i.
Automatic Document Feeder (ADF)
Telephone Line (M15i Only)
1
Ø Connect the Automatic Document
Feeder Cable to the port shown
and fasten the side screws.
NOTE:The ADF is an option on the M15
2
Ø Connect the Telephone Line Cord
from the wall jack to the LINE
jack.
Ø If required, connect an answering
machine and/or telephone to the
EXT jack.
To Next Page
Loading...
