Page 5-6 Xerox WorkCentre M15/M15i User Guide
Paper and Other Media
Loading the Bypass Tray
l Remove any curl
on postcards,
envelopes, and
labels before
loading them into
the Bypass Tray.
l Hold
transparencies by
the edges and
avoid touching
the print side.
1
Ø Lower the Bypass Tray, located
on the right side of the product.
Ø Unfold the paper support
extension.
2
Ø Prepare a stack of paper or
envelopes for loading by flexing
or fanning them back and forth.
Straighten the edges on a level
surface.
3
Ø Load the print material with the
print side facing down and
against the right edge of the tray.
To Next Page
Loading...
