Xerox WorkCentre M15 - Setting the Receive Mode

Page 6-20 Xerox WorkCentre M15/M15i User Guide
Fax (M15i Only)
Setting the Receive Mode
1
Ø Ensure ’FAX’ displays.
Ø If not, press the [Copy/Fax/Scan]
key repeatedly until ’FAX MODE’
displays and press [Enter].
Enter KeyCopy/Fax/Scan Key
2
Ø Press [Menu/Exit]. ’SYSTEM
DATA’ displays.
SYSTEM DATA
[PAPER SIZE...]
WorkCentre M15i
3
Ø Press or until ’SYSTEM
SETUP’ displays, then press
[Enter].
Ø Press or to select the
required receive mode.
Ø Press [Enter] to save the setting.
Ø Press [Menu/Exit] to save and
exit.
SYSTEM SETUP
[RECEIVE MODE...]
WorkCentre M15i