Page 7-2 Xerox WorkCentre M15/M15i User Guide
Print
Printing Procedure
Use this procedure to create and print a document using a Windows application on a PC. The
steps provided should be used as a guide and may vary depending on the application being
used.
l For further
information, refer
to the
documentation
provided with the
software
application.
Prior to printing from a PC, ensure the WorkCentre M15/M15i is connected to the computer
correctly. Printer Driver software must be loaded on the PC to enable printing.
The WorkCentre M15/M15i should be powered on and paper loaded in one of the paper trays.
Create or Open the Document
Select Print Options
1
Ø Open the application required for
the document.
Ø Select an existing document or
create a new document.
2
Ø Select [Print] from the [File]
menu.
Ø Ensure the WorkCentre 15 Series
is selected as the default printer.
Ø Select [Properties] or [Setup] and
change the settings required.
Ø Select [OK] to close the
properties dialog box.
To Next Page
Loading...
