Xerox WorkCentre M15 - Setting the Product to Send Toner Low Information

Page 10-8 Xerox WorkCentre M15/M15i User Guide
Maintenance
Setting the Product to Send Toner Low Information
If the Notify Toner menu option is set to ON, when the toner cartridge needs to be replaced,
the machine automatically sends a fax to the service company or the dealer to notify them that
the machine requires a new toner cartridge. This feature will be activated only when the phone
number of the service company or the dealer is stored in the machine’s memory.
Use the instructions below to activate this process.
Ø Press [Menu/Exit] on the Control Panel, then press or until ‘MAINTENANCE’
displays, and press [Enter].
Ø Press or until ‘NOTIFY TONER’ displays, then press [Enter].
Ø Press or to turn this feature ‘ON’ or ‘OFF’, then press [Enter].
Ø Enter the Customer Fax Number, then press [Enter].
Ø Enter the Customer Name, then press [Enter].
Ø Enter the Service Fax Number to which the product sends the notification fax message,
then press [Enter].
Ø Enter the Serial Number of the product, then press [Enter].
l The product
serial number is
located on the
machine, behind
the front door.
Refer to
“Customer
Support” on page
1-5 for further
information.