Xerox WorkCentre M15 - Adjusting Speaker Volume (M15 I Only)

Xerox WorkCentre M15/M15i User Guide Page 9-17
Machine Administration
Adjusting Speaker Volume (M15i Only)
1
Ø Ensure ’FAX’ displays.
Ø If not, press the [Copy/Fax/Scan]
key repeatedly until ’FAX MODE’
displays and press [Enter].
Enter KeyCopy/Fax/Scan Key
2
Ø Press [Manual Dial]. A dial tone
can be heard.
Ø Press or repeatedly
until the required loudness is
found. The display shows the
current volume level.
Ø Press [Stop] to save the setting
and return to Standby mode.
VOLUME
L [ _ _ g _ _ _ _ ] H
WorkCentre M15i