Xerox WorkCentre M15 - Keypad Character Assignment; Inserting a Pause

Page 3-12 Xerox WorkCentre M15/M15i User Guide
Product Overview
Keypad Character Assignment
The following table shows the characters which are assigned to each number key on the
Numeric Keypad:
Editing Numbers or Names
To correct a mistake, move the cursor under the wrong character by pressing or .
Press the correct number to overwrite the incorrect character. If [Clear/Clear All] is pressed,
all the characters are deleted.
Inserting a Pause
With some telephone systems an access code (9 for example) is required and a second dial
tone is heard. In this instance a pause must be entered in the telephone number. A pause can
also be entered within a Speed Dial number.
To insert a pause, press [Redial/Pause] at the appropriate place while entering the telephone
number. A “-” will appear in the display at the corresponding location.
KEY ASSIGNED NUMBERS, LETTERS OR
CHARACTERS
1
1> Space
2 A > B> C > 2
3 D > E > F > 3
4 G > H > I > 4
5 J > K > L > 5
6 M > N > O > 6
7 P > Q > R > S > 7
8 T > U > V > 8
9 W > X > Y > Z > 9
0 + > - > , > . > ‘ > / > * > # > & > 0