Xerox WorkCentre M15 - Run the Scan Application Program

Page 8-4 Xerox WorkCentre M15/M15i User Guide
Scan (M15i Only)
Document Glass:
l When using the
Document Glass,
ensure there are
no documents in
the ADF.
On completion of
the job, ensure
the Document
Feeder is closed.
Run the Scan Application Program
Ø Raise the ADF or cover and
position the original face down on
the Document Glass.
Align with the registration arrow in
the rear left corner.
Ø Lower the ADF or cover.
2
Ø Start the scan application
program being used to acquire
the scanned image.
Ø Follow the instructions provided
with the application program to
scan the document and retrieve it
at the PC.
i When using Paperport software to scan your job, the application will create a separate file for
each scanned page of the job. These separate pages can then be merged within the
Paperport application.