Xerox WorkCentre M15 - Enter the Quantity; Select the Copy Features

Page 4-4 Xerox WorkCentre M15/M15i User Guide
Copy
Select the Copy Features
l Only those
features relevant
to the machine
configuration will
be available.
i For more information about the available Copy features, refer to “Copy Features” on page 4-6.
Enter the Quantity
l The maximum
copy quantity is
999.
4
Ø To select a Copy feature, press
the feature key required on the
Control Panel.
The current setting for the
selected feature will be displayed.
Ø Press the key repeatedly until the
setting required is displayed.
Ø When the correct setting is
displayed, press [Enter] to save
the selection.
Copy Features
5
Ø Use the Numeric Keypad to enter
the number of copies required.
Ø If necessary, press [Clear/Clear
All] to clear the current quantity
and enter a new quantity.
Numeric Keypad
Clear/Clear All Key