Xerox WorkCentre M15 - Document Glass; Load the Originals

Xerox WorkCentre M15/M15i User Guide Page 4-3
Copy
Load the Originals
Automatic Document Feeder (ADF):
i Up to 30 sheets of 80 g/m
2
(20lb bond) paper can be loaded. Weight ranges from 45 - 105 g/m
2
(12.5 - 28lb). Sizes range from B5 to Legal (7” x 10” to 8.5” x 14” ). Refer to “Scanner and Copier
Specifications” on page 12-5 for full ADF specifications.
Document Glass:
l When using the
Document Glass,
ensure there are
no documents in
the ADF.
3
Ø Remove all staples and paper
clips prior to loading.
Ø Adjust the sliding document
guides to the size required.
Ø Insert the originals neatly into the
Automatic Document Feeder,
face up.
The first page should be on top
with the headings towards the
back or left of the machine.
Ø Align the stack with the left and
rear edges of the tray. Adjust the
guides to just touch the edges of
the originals.
Ø Raise the ADF or cover and
position the original face down on
the Document Glass.
Align with the registration arrow in
the rear left corner.
Ø Lower the ADF or cover.