Xerox WorkCentre M15/M15i User Guide Page 6-3
Fax (M15i Only)
Document Glass:
l Ensure no 
documents are 
loaded in the ADF 
when using the 
Document Glass.
l On completion of 
the job, ensure 
the ADF is 
closed.
Select the Copy/Fax/Scan key
Ø Raise the ADF or cover and 
position the original face down on 
the Document Glass.
Align with the registration arrow in 
the rear left corner.
Ø Lower the ADF or cover.
2
Ø Ensure ’FAX’ displays.
Ø If not, press the [Copy/Fax/Scan] 
key repeatedly until ’FAX MODE’ 
displays and press [Enter].
Enter KeyCopy/Fax/Scan Key