Xerox WorkCentre M15 - Page 85

Xerox WorkCentre M15/M15i User Guide Page 6-13
Fax (M15i Only)
Adding to or Cancelling a Scheduled Operation
A Delay Send, Priority Send, Group Send and the polling functions are all scheduled
operations. To add to a scheduled operation or cancel a scheduled operation use the following
instructions:
Ø If adding to a scheduled
operation, load the originals.
Ø Ensure the LCD displays FAX. If
not, press the [Copy/Fax/Scan]
key until ’FAX MODE’ displays
and press [Enter].
Ø Press [Menu/Exit]. ’SYSTEM
DATA’ displays.
Ø Press or until ’ADD/
CANCEL’ displays, then press
[Enter].
Ø Press or to select
’CANCEL’ or ’ADD’, then press
[Enter].
Information for the last job stored
in memory displays.
Ø Press or until the
required operation displays, then
press [Enter].
If cancelling an operation a
confirmation message displays.
If adding to an operation the total
pages scanned and the number
of pages added displays.
ADD/CANCEL
[OPERATION...]
WorkCentre M15i
ARE YOU SURE?
1:YES 2:NO
WorkCentre M15i
TOTAL PAGES = 006
ADDED PAGES = 002
WorkCentre M15i