Xerox WorkCentre M15 - Page 87

Xerox WorkCentre M15/M15i User Guide Page 6-15
Fax (M15i Only)
Speed Dialing
l Use to store regularly
used fax numbers which
are then accessed using
a 1 or 2 digit Speed Dial
number.
Storing a
number
Up to 80
numbers can be
stored in Speed
Dial locations 1-
80.
Ø Ensure the LCD displays FAX. If not, press the
[Copy/Fax/Scan] key until ’FAX MODE’ displays and
press [Enter].
Ø Press and hold [Speed Dial] for 2 seconds.
Ø Enter a Speed Dial number (1 - 80) using the
Numeric Keypad, then press [Enter].
Ø If a number is already stored in the location entered,
the number displays.
Ø Enter the fax number to be stored, then press
[Enter].
Ø If required, enter a name using the Numeric Keypad
then press [Enter]. If a name is not required, press
[Enter].
Ø To store more telephone numbers repeat the
procedure.
Ø To return to Standby mode press [Menu/Exit].
Using
Speed
Dialing
Use to select a
Speed Dial
number already
setup.
Ø Load the originals and ensure the LCD displays FAX.
If not, press the [Copy/Fax/Scan] key until ’FAX
MODE’ displays and press [Enter].
Ø Program the features required for the job.
Ø Press [Speed Dial] and enter the 1 or 2 digit Speed
Dial number.
Ø Press [Enter].