4.Travel With Safety
106
Warning
●
Do not adjust or repair the electric seat
belt by yourself. If the electric seat belt
fails, please contact the local authorized
service center for maintenance.
●
In the event of a collision or a similar
situation, if the seat belt is subjected to
a strong impact, a new seat belt needs
to be replaced in time. If the seat belt
shows signs of wear or damage, it must
also be replaced.
●
Although electric seat belts can alert you
to danger or avoid or mitigate injuries
when a danger occurs, you still need to
drive carefully to avoid danger.
Check the Seat BeltCheck the Seat Belt
To conrm the normal operation of the safety
belt, the following three simple inspections
must be performed on each safety belt.
1. Fasten the seat belt and quickly pull out
the seat belt at the position closest to the
buckle. The buckle should remain securely
locked.
2. Unfasten the seat belt and rewind the seat
belt to the maximum. Check whether the
seat belt pulled out is too slack, check the
wear of the seat belt.
3. Pull out the seat belt halfway, hold the
lock tongue and quickly pull forward. The
internal locking mechanism of the seat belt
will automatically lock to prevent the seat
belt from being unwound excessively.
If any seat belt fails any of the above tests,
please contact your local authorized service
center immediately.