XPENG G3 User Manual

2.Preparation（Exterior Overview）
34
Hood
OpenOpen
1. Pull the handle of the hood at the lower left
of the instrument panel, the hood unlocks
and bounces slightly.
2. Locate the plunger latch and ip the latch
to fully unlock it.
3. Lift the hood and take out the support rod
to support the hood in the limit position.
CloseClose
Remove the support rod and x it in its original
position, lower the hood down to the vehicle,
and then release your hands to let the hood
fall down by its own weight, thus being locked.
After closed, please check whether the hood is
locked rmly.

XPENG G3 Specifications

General

Brand	XPENG
Model	G3
Category	Automobile
Language	English