8.Maintenance
228
The coolant level should be kept between MIN
and MAX. In case the level is lower than MIN,
it is required to fill the coolant approved by
Xpeng Automobile in time.
Filling Motor CoolantFilling Motor Coolant
Unscrew the lid of the tank and fill it with
coolant.
►
To improve the performance and life
cycle of the motor to the maximum, a
specic type of ethylene glycol aqueous
solution (with the freezing point to
be determined according to the local
minimum temperature) is selected for
the cooling system.
►
After lling the coolant, you should go
to the local authorized service center to
check whether the system leaks.
Inspection of Heating Coolant
When delivered from the factory, the heating
system is filled well with coolant, and it
is required to check the heating system
coolant level regularly during the prescribed
maintenance period.
Check the level mark at the side of the coolant
tank:
►
MAX: Upper limit
►
MIN: Lower limit
To Next Page
Loading...
Need help?
General
