XPENG G3 - Simulated Sound in Low Speed

70
2.Preparation（Interior Overview)
►
If the wiper switch is in the "LO" or
"HI" position, after releasing the wash
switch, the washer stops spraying
water, and the wiper keeps the low or
high speed wiping.
Wipe Once When ClickWipe Once When Click
─
Turn the washing switch to the "MIST"
position and release it immediately, the
wiper will wipe once.
─
Turn the washing switch to the "MIST"
position and hold it there, the wiper will
continuously wipe. After released, the
wiper stops.
Caution
●
When the front windshield is frozen or
there is a lot of snow, it is recommended
to clear it manually rstly then start the
wiper, otherwise the wiper motor may
be easily damaged.
Simulated Sound in Low Speed
G3 is a pure electric vehicle with low noise
when starting or driving. In order to attract
the attention of pedestrians on the road, it is
equiped with a sound simulator of low-speed
analog sound.
When the vehicle speed is less than 30km/h,
the vehicle will emit a simulated sound.