XPENG G3 - Inspection of Motor Coolant

8.Maintenance
227
1
2
3
4
5
6
7
8
9
10
11
The coolant level should be kept between MIN
and MAX. If the level is lower than MIN, it is
required to ll the coolant approved by Xpeng
motor in time.
Filling Power Battery CoolantFilling Power Battery Coolant
Unscrew the lid of the tank and fill it with
coolant.
►
To improve the performance and
life cycle of the power battery to the
maximum, a specific type of ethylene
glycol aqueous solution (with the
freezing point to be determined
according to the local minimum
temperature) is selected for the cooling
system.
►
After lling the coolant, you should go
to the local authorized service center to
check whether the system leaks.
Inspection of Motor Coolant
When delivered from the factory, the motor
cooling system is lled well with coolant, and
it is required to check the motor coolant level
regularly during the prescribed maintenance
period.
Check the level mark at the side of the coolant
tank:
►
MAX: Upper limit
►
MIN: Lower limit