8.Maintenance
229
1
2
3
4
5
6
7
8
9
10
11
The coolant level should be kept between MIN
and MAX. In case the level is lower than MIN,
it is required to fill the coolant approved by
Xpeng Automobile in time.
Filling Heating CoolantFilling Heating Coolant
Unscrew the lid of the tank and fill it with
coolant.
►
To improve the performance and life
cycle of the heating system to the
maximum, a specific type of ethylene
glycol aqueous solution (with the
freezing point to be determined
according to the local minimum
temperature) is selected for the cooling
system.
►
After lling the coolant, you should go
to the local authorized service center to
check whether the system leaks.
Inspection of Brake Fluid
If the level of brake uid tank is lower than the
suggested level, alarm will be raised via the
brake light on dashboard. If the alarm is raised
during driving, the vehicle must be pulled
over and parked under the premise of ensured
safety. Do not keep driving. At the same time,
please contact the local authorized service
center immediately.
Warning
●
If you find that the brake pedal is
loose or the brake fluid is significantly
depleted, please contact your local
authorized service center immediately.
Driving under these conditions may
result in extended braking distance or
complete braking failure.
To Next Page
Loading...
Need help?
General
