10.Emergency Rescue
260
Disconnect the Low-voltage Repair
Switch
In the event of a vehicle collision which not met
the condition to trigger the collision protection
or in case the vehicle needs to be trailed due
to other malfunctions, the low-voltage service
switch should be manually disconnected for
safety.
Please follow the steps below:
1. Cut off the negative connection of the
battery.
2. Pull out the yellow lock in the direction of
the -Arrow-.
3. Press the black lock in the direction of
-Arrow A-, and then pull out the second
yellow lock in the direction of -Arrow B-.
To Next Page
Loading...
Need help?
General
