10.Emergency Rescue
261
1
2
3
4
5
6
7
8
9
10
11
4. Plug appropriate tool into the round hole
to prevent others from plugging in the low-
voltage service switch and to avoid shaking
the low-voltage service switch during
transportation, which may cause internal
contact of the low-voltage service switch
and lead to danger due to high-voltage
power-on.
►
At this time, both the high-voltage
interlock circuit and the high-
voltage contactor coil power circuit is
disconnected.
Caution
●
When disconnecting the low-voltage
service switch, the personnel must wear
rubber insulating gloves.
To Next Page
Loading...
